Hi All
I am a newbie and hoping someone will assist me in guidance to resolve a hardware issue.
I am running LXDE on Raspberry Pi.
I have a LG usb touchscreen Flatron L1510BF.
I have searched for drivers in Linux although no joy.
The screen display works fine although touchscreen is not functioning.
Although when I "usb-devices" in terminal the following appears:
T: Bus=01 Lev=04 Prnt=05 Port=01 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=f9e9 Rev=01.00
S: Manufacturer=ITM Inc
S: Product=USB Touch Panel
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I have also sudo apt-get install all tslib files, which show as installed although not sure if anything else is needed to be performed after download/install.
Sorry if little or too much info, much would be appreciated in any guidance to resolving this issue.
Thanks heaps in advance!
Touchscreen no operation.
-
- Posts: 2
- Joined: Sun Sep 15, 2013 10:59 am
Re: Touchscreen no operation.
Anyone with any ideas or solutions? Much appreciated.