Hi,
I am using FreeCAD and after very little time it starts messing up other programs and desktop display widgets.
Initially fonts either start to appear broken but still legible, turn into something look like Hebrew or go blank altogether. I use VFE filemanager and eventually all I have left is the window structure and panels with the tree hierarchy, but with no content: no icons, no file name ; totally blank and unusable. Similarly I use LXterminal and this ends up functionally intact but with invisible fonts. It is usually sufficient to logout the desktop session and login again, though I may need a 3-finger salute to do this since I can not read the task bar items and the shutdown menu.
I'm not sure where start logging this bug. Only FreeCAD seems to provoke this, but whatever FC is doing it should not be able to mess up my desktop even if it wants to, so my impression is that it is a yet another nouveau driver bug. My on board graphics card is NVIDIA [GeForce 6150 LE], there are no proprietory drivers for this apparently, so I'm stuck with nouveau ( which generally works quite well for my undemanding usage ).
This is quite a problem since I need to logout after about 20m work sometimes and then restart all my work to get back to what I was doing.
No one else on FreeCAD forums seems to be having this so I'm guessing it is my odd mix of OS/desktop/hardware/videocard .
Other GUI programs are less affected, generally firefox t'bird leafpad etc, are still readable when LXterminal VFE and LXDE desktop widgets are unusable.
This takes me away from video drivers and maybe some common libraries with are leaking resources or getting corrupted.
Can anyone add any insight as to what is going on here?
TIA
font corruption makes LXDE become unusable.
Re: font corruption makes LXDE become unusable.
what distro?
It sounds like a graphics issue; not sure why freecad triggers it.
please show us:
It sounds like a graphics issue; not sure why freecad triggers it.
please show us:
Code: Select all
lspci -k | grep -iEA5 'vga|3d|display'
cat /var/log/Xorg.0.log
ls -al /var/log/Xorg.0.log
journalctl -bRe: font corruption makes LXDE become unusable.
Yes, sorry, I forgot to mark Fedora 30 installed at Fedora 23 from LXDE "spin".
I have what I think is an unrelated issue which I've posted here without result. One of the entries in the sessions settings is blank. I have not been able to work out what this relates too but I noticed it at a time when I was trying to remove unnecessary services. I removed one too many and my desktop wallpaper and the drive icons do not show up. I need to run pcmanfm --desktop & manually on a new session.
" Unable to read the LXDE configuration file." Is this related?
I don't think the DBUS thing is an error on Fedora, I think it is a limitation from SELINUX.
FreeCAD is still beta level devel but I don't think it can be blamed for more than triggering a bug. Even maliceous code should not be able to do this.
I should probably grab Xorg.0.log next time it goes badly wrong.
BTW I have been seeing this on both the github master which I build locally and an ImageApp they supply, with all depenedent libs included.
Thanks for taking a look.
Code: Select all
VGA compatible controller: NVIDIA Corporation C51 [GeForce 6150 LE] (rev a2)
Subsystem: Packard Bell B.V. Device e027
Kernel driver in use: nouveau
Kernel modules: nouveau
Code: Select all
-rw-r--r--. 1 root root 33725 Aug 18 13:59 /var/log/Xorg.0.log
Code: Select all
-- Logs begin at Mon 2019-07-08 12:15:40 BST, end at Sun 2019-08-18 14:25:53 BST. --
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Listening on Sound System.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Started Mark boot as successful after the user session has run 2 minutes.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Reached target Timers.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Reached target Paths.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Starting D-Bus User Message Bus Socket.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Listening on Multimedia System.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Listening on D-Bus User Message Bus Socket.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Reached target Sockets.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Reached target Basic System.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Reached target Default.
Aug 17 18:10:21 localhost.localdomain systemd[1119]: Startup finished in 177ms.
Aug 17 18:10:23 localhost.localdomain systemd[1119]: Started D-Bus User Message Bus.
Aug 17 18:10:23 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating service name='com.redhat.imsettings' requested by ':1.3' (uid=1000 pid=1210 comm="/usr/libe>
Aug 17 18:10:24 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.>
Aug 17 18:10:24 localhost.localdomain systemd[1119]: Starting Virtual filesystem service...
Aug 17 18:10:24 localhost.localdomain systemd[1119]: Started Virtual filesystem service.
Aug 17 18:10:24 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.gtk.vfs.Daemon'
Aug 17 18:10:24 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'com.redhat.imsettings'
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.150255]: IMSettings-Daemon[1214]: INFO: Starting imsettings-daemon...
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.150609]: IMSettings-Daemon[1214]: INFO: [HOME=/home/user/.config/imsettings]
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.150696]: IMSettings-Daemon[1214]: INFO: [XINPUTRCDIR=/etc/X11/xinit/]
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.150770]: IMSettings-Daemon[1214]: INFO: [XINPUTDIR=/etc/X11/xinit/xinput.d/]
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.150844]: IMSettings-Daemon[1214]: INFO: [MODULEDIR=/usr/lib64/imsettings]
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.150919]: IMSettings-Daemon[1214]: INFO: [MODULES=lxde]
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.155196]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.170009]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.195291]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.206912]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.291488]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.302314]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.317597]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:24 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061824.328164]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:26 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.21>
Aug 17 18:10:26 localhost.localdomain systemd[1119]: Starting Accessibility services bus...
Aug 17 18:10:26 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating service name='org.xfce.Xfconf' requested by ':1.22' (uid=1000 pid=1345 comm="/usr/libexec/a>
Aug 17 18:10:26 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.xfce.Xfconf'
Aug 17 18:10:26 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.a11y.Bus'
Aug 17 18:10:26 localhost.localdomain systemd[1119]: Started Accessibility services bus.
Aug 17 18:10:26 localhost.localdomain at-spi-bus-launcher[1345]: dbus-daemon[1361]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=1000 pid=1342 comm="/usr/lib>
Aug 17 18:10:26 localhost.localdomain at-spi-bus-launcher[1345]: dbus-daemon[1361]: Successfully activated service 'org.a11y.atspi.Registry'
Aug 17 18:10:26 localhost.localdomain at-spi-bus-launcher[1345]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.160778]: IMSettings-LXDE backend[1214]: WARNING **: Unable to load the lxde configuration file.
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.294428]: IMSettings-Daemon[1214]: INFO: Attempting to switch IM to none [lang=en_GB.utf8, desktop=LXDE, upd>
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.356308]: GLib[1214]: DEBUG: posix_spawn avoided (fd close requested)
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.581800]: IMSettings-Daemon[1214]: INFO: no need to invoke any auxiliary process for none
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.581990]: IMSettings-Daemon[1214]: INFO: no need to invoke any main process for none
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.582070]: IMSettings-LXDE backend[1214]: WARNING **: Unable to read the LXDE configuration file.
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.707318]: GLib[1214]: DEBUG: posix_spawn avoided (fd close requested)
Aug 17 18:10:28 localhost.localdomain com.redhat.imsettings[1146]: [ 1566061828.741621]: IMSettings-LXDE backend[1214]: INFO: Setting up gtk-im-context-simple as gtk+ immodule
Aug 17 18:10:29 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating via systemd: service name='org.gtk.vfs.Metadata' unit='gvfs-metadata.service' requested by >
Aug 17 18:10:29 localhost.localdomain systemd[1119]: Starting Virtual filesystem metadata service...
Aug 17 18:10:29 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.gtk.vfs.Metadata'
Aug 17 18:10:29 localhost.localdomain systemd[1119]: Started Virtual filesystem metadata service.
Aug 17 18:10:32 localhost.localdomain systemd[1119]: Starting Sound Service...
Aug 17 18:10:43 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating service name='org.gnome.GConf' requested by ':1.39' (uid=1000 pid=1587 comm="/usr/libexec/p>
Aug 17 18:10:43 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.gnome.GConf'
Aug 17 18:10:43 localhost.localdomain polkit-kde-authentication-agent-1[1516]: "Cannot register authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authenticatio>
Aug 17 18:10:43 localhost.localdomain polkit-kde-authentication-agent-1[1516]: Couldn't register listener!
Aug 17 18:10:44 localhost.localdomain systemd[1119]: Started Sound Service.
Aug 17 18:10:53 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating via systemd: service name='org.gtk.vfs.UDisks2VolumeMonitor' unit='gvfs-udisks2-volume-moni>
Aug 17 18:10:53 localhost.localdomain systemd[1119]: Starting Virtual filesystem service - disk device monitor...
Aug 17 18:10:54 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.gtk.vfs.UDisks2VolumeMonitor'
Aug 17 18:10:54 localhost.localdomain systemd[1119]: Started Virtual filesystem service - disk device monitor.
Aug 17 18:10:54 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Activating via systemd: service name='org.gtk.vfs.MTPVolumeMonitor' unit='gvfs-mtp-volume-monitor.serv>
Aug 17 18:10:54 localhost.localdomain systemd[1119]: Starting Virtual filesystem service - Media Transfer Protocol monitor...
Aug 17 18:10:54 localhost.localdomain dbus-daemon[1146]: [session uid=1000 pid=1146] Successfully activated service 'org.gtk.vfs.MTPVolumeMonitor'
Aug 17 18:10:54 localhost.localdomain systemd[1119]: Started Virtual filesystem service - Media Transfer Protocol monitor.
Aug 17 18:11:07 localhost.localdomain pulseaudio[1565]: E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible ca>
Aug 17 18:13:05 mybox systemd[1119]: Starting Mark boot as successful...
Aug 17 18:13:05 mybox systemd[1119]: Started Mark boot as successful." Unable to read the LXDE configuration file." Is this related?
I don't think the DBUS thing is an error on Fedora, I think it is a limitation from SELINUX.
Code: Select all
[ 76.649]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 76.649] Build Operating System: 4.19.9-300.fc29.x86_64
[ 76.649] Current Operating System: Linux localhost.localdomain 5.1.21-200.fc29.x86_64 #1 SMP Mon Jul 29 15:30:04 UTC 2019 x86_64
[ 76.649] Kernel command line: BOOT_IMAGE=(hd0,msdos3)/vmlinuz-5.1.21-200.fc29.x86_64 root=UUID=0e7f65df-e28b-45ec-ab09-b5bb44145fe77 ro rd.driver.blacklist=nvidia modprobe.blacklist=nvidia rhgb
[ 76.649] Build Date: 26 February 2019 08:03:46PM
[ 76.649] Build ID: xorg-x11-server 1.20.4-1.fc29
[ 76.649] Current version of pixman: 0.34.0
[ 76.649] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 76.649] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 76.650] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 17 18:09:51 2019
[ 76.771] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 76.771] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 77.104] (==) No Layout section. Using the first Screen section.
[ 77.104] (==) No screen section available. Using defaults.
[ 77.104] (**) |-->Screen "Default Screen Section" (0)
[ 77.104] (**) | |-->Monitor "<default monitor>"
[ 77.175] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 77.175] (==) Automatically adding devices
[ 77.175] (==) Automatically enabling devices
[ 77.175] (==) Automatically adding GPU devices
[ 77.175] (==) Automatically binding GPU devices
[ 77.175] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 77.175] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 77.176] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 77.176] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 77.176] (II) Loader magic: 0x55bb10339e00
[ 77.176] (II) Module ABI versions:
[ 77.176] X.Org ANSI C Emulation: 0.4
[ 77.176] X.Org Video Driver: 24.0
[ 77.176] X.Org XInput driver : 24.1
[ 77.176] X.Org Server Extension : 10.0
[ 77.180] (++) using VT number 1
[ 77.181] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 77.183] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 77.194] (--) PCI:*(0@0:5:0) 10de:0241:1631:e027 rev 162, Mem @ 0xfc000000/16777216, 0xe0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 77.280] (II) LoadModule: "glx"
[ 77.598] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 78.733] (II) Module glx: vendor="X.Org Foundation"
[ 78.733] compiled for 1.20.4, module version = 1.0.0
[ 78.733] ABI class: X.Org Server Extension, version 10.0
[ 78.862] (==) Matched nouveau as autoconfigured driver 0
[ 78.862] (==) Matched nv as autoconfigured driver 1
[ 78.862] (==) Matched modesetting as autoconfigured driver 2
[ 78.862] (==) Matched fbdev as autoconfigured driver 3
[ 78.862] (==) Matched vesa as autoconfigured driver 4
[ 78.862] (==) Assigned the driver to the xf86ConfigLayout
[ 78.862] (II) LoadModule: "nouveau"
[ 79.168] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 79.272] (II) Module nouveau: vendor="X.Org Foundation"
[ 79.272] compiled for 1.20.0, module version = 1.0.15
[ 79.272] Module class: X.Org Video Driver
[ 79.272] ABI class: X.Org Video Driver, version 24.0
[ 79.272] (II) LoadModule: "nv"
[ 79.419] (WW) Warning, couldn't open module nv
[ 79.419] (EE) Failed to load module "nv" (module does not exist, 0)
[ 79.419] (II) LoadModule: "modesetting"
[ 79.419] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 79.476] (II) Module modesetting: vendor="X.Org Foundation"
[ 79.476] compiled for 1.20.4, module version = 1.20.4
[ 79.476] Module class: X.Org Video Driver
[ 79.476] ABI class: X.Org Video Driver, version 24.0
[ 79.476] (II) LoadModule: "fbdev"
[ 79.477] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 79.520] (II) Module fbdev: vendor="X.Org Foundation"
[ 79.520] compiled for 1.20.0, module version = 0.5.0
[ 79.520] Module class: X.Org Video Driver
[ 79.520] ABI class: X.Org Video Driver, version 24.0
[ 79.520] (II) LoadModule: "vesa"
[ 79.520] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 79.554] (II) Module vesa: vendor="X.Org Foundation"
[ 79.554] compiled for 1.20.0, module version = 2.4.0
[ 79.554] Module class: X.Org Video Driver
[ 79.554] ABI class: X.Org Video Driver, version 24.0
[ 79.554] (II) NOUVEAU driver
[ 79.554] (II) NOUVEAU driver for NVIDIA chipset families :
[ 79.554] RIVA TNT (NV04)
[ 79.554] RIVA TNT2 (NV05)
[ 79.554] GeForce 256 (NV10)
[ 79.554] GeForce 2 (NV11, NV15)
[ 79.554] GeForce 4MX (NV17, NV18)
[ 79.554] GeForce 3 (NV20)
[ 79.554] GeForce 4Ti (NV25, NV28)
[ 79.555] GeForce FX (NV3x)
[ 79.555] GeForce 6 (NV4x)
[ 79.555] GeForce 7 (G7x)
[ 79.555] GeForce 8 (G8x)
[ 79.555] GeForce GTX 200 (NVA0)
[ 79.555] GeForce GTX 400 (NVC0)
[ 79.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 79.555] (II) FBDEV: driver for framebuffer: fbdev
[ 79.555] (II) VESA: driver for VESA chipsets: vesa
[ 79.557] (II) [drm] nouveau interface version: 1.3.1
[ 79.557] (WW) Falling back to old probe method for modesetting
[ 79.558] (WW) Falling back to old probe method for fbdev
[ 79.558] (II) Loading sub module "fbdevhw"
[ 79.558] (II) LoadModule: "fbdevhw"
[ 79.558] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 79.575] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 79.575] compiled for 1.20.4, module version = 0.0.2
[ 79.575] ABI class: X.Org Video Driver, version 24.0
[ 79.575] (II) Loading sub module "dri2"
[ 79.575] (II) LoadModule: "dri2"
[ 79.575] (II) Module "dri2" already built-in
[ 79.575] (--) NOUVEAU(0): Chipset: "NVIDIA NV4E"
[ 79.576] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 79.576] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 79.576] (==) NOUVEAU(0): RGB weight 888
[ 79.576] (==) NOUVEAU(0): Default visual is TrueColor
[ 79.576] (==) NOUVEAU(0): Using HW cursor
[ 79.576] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 79.576] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 79.576] (==) NOUVEAU(0): Page flipping enabled
[ 79.576] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 79.576] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 79.576] (II) NOUVEAU(0): Initializing outputs ...
[ 79.618] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 79.620] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 79.620] (II) NOUVEAU(0): 2 crtcs needed for screen.
[ 79.621] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 79.621] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 79.664] (II) NOUVEAU(0): EDID for output VGA-1
[ 79.664] (II) NOUVEAU(0): Manufacturer: HWP Model: 26a6 Serial#: 2147483648
[ 79.664] (II) NOUVEAU(0): Year: 2008 Week: 9
[ 79.664] (II) NOUVEAU(0): EDID Version: 1.3
[ 79.664] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 79.664] (II) NOUVEAU(0): Sync: Separate
[ 79.664] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 43 vert.: 27
[ 79.664] (II) NOUVEAU(0): Gamma: 2.20
[ 79.664] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 79.664] (II) NOUVEAU(0): Default color space is primary color space
[ 79.664] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 79.664] (II) NOUVEAU(0): redX: 0.640 redY: 0.340 greenX: 0.290 greenY: 0.610
[ 79.664] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 79.664] (II) NOUVEAU(0): Supported established timings:
[ 79.664] (II) NOUVEAU(0): 720x400@70Hz
[ 79.664] (II) NOUVEAU(0): 640x480@60Hz
[ 79.664] (II) NOUVEAU(0): 640x480@75Hz
[ 79.664] (II) NOUVEAU(0): 800x600@60Hz
[ 79.664] (II) NOUVEAU(0): 800x600@75Hz
[ 79.664] (II) NOUVEAU(0): 832x624@75Hz
[ 79.664] (II) NOUVEAU(0): 1024x768@60Hz
[ 79.664] (II) NOUVEAU(0): 1024x768@75Hz
[ 79.664] (II) NOUVEAU(0): 1280x1024@75Hz
[ 79.664] (II) NOUVEAU(0): 1152x864@75Hz
[ 79.664] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 79.664] (II) NOUVEAU(0): Supported standard timings:
[ 79.664] (II) NOUVEAU(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
[ 79.664] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 79.664] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 79.664] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 79.664] (II) NOUVEAU(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 79.664] (II) NOUVEAU(0): Supported detailed timing:
[ 79.664] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 433 x 271 mm
[ 79.664] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 79.664] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 79.664] (II) NOUVEAU(0): Ranges: V min: 55 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 79.664] (II) NOUVEAU(0): Monitor name: HP w2007
[ 79.664] (II) NOUVEAU(0): Serial No: CNN8090XHY
[ 79.664] (II) NOUVEAU(0): EDID (in hex):
[ 79.664] (II) NOUVEAU(0): 00ffffffffffff0022f0a62600000080
[ 79.664] (II) NOUVEAU(0): 09120103682b1b78eec585a3574a9c26
[ 79.664] (II) NOUVEAU(0): 125054a56b807100814081809500b300
[ 79.664] (II) NOUVEAU(0): 01010101010121399030621a274068b0
[ 79.664] (II) NOUVEAU(0): 3600b10f1100001c000000fd00374c18
[ 79.664] (II) NOUVEAU(0): 5311000a202020202020000000fc0048
[ 79.664] (II) NOUVEAU(0): 502077323030370a20202020000000ff
[ 79.664] (II) NOUVEAU(0): 00434e4e383039305848590a202000f0
[ 79.664] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 79.664] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 79.664] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "1152x720"x60.0 67.28 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 79.664] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 79.664] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 79.666] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 79.666] (II) NOUVEAU(0): Output VGA-1 connected
[ 79.666] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[ 79.666] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 79.666] (II) NOUVEAU(0): Output VGA-1 using initial mode 1680x1050 +0+0
[ 79.666] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 79.666] (II) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 79.666] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 79.666] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 79.666] (**) NOUVEAU(0): Mode "1152x720": 67.3 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1152x720"x60.0 67.28 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 79.666] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 79.666] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 79.666] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 79.666] (==) NOUVEAU(0): DPI set to (96, 96)
[ 79.666] (II) Loading sub module "fb"
[ 79.666] (II) LoadModule: "fb"
[ 79.666] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 79.710] (II) Module fb: vendor="X.Org Foundation"
[ 79.710] compiled for 1.20.4, module version = 1.0.0
[ 79.710] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.710] (II) Loading sub module "shadowfb"
[ 79.710] (II) LoadModule: "shadowfb"
[ 79.710] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 79.723] (II) Module shadowfb: vendor="X.Org Foundation"
[ 79.723] compiled for 1.20.4, module version = 1.0.0
[ 79.723] ABI class: X.Org ANSI C Emulation, version 0.4
[ 79.723] (II) UnloadModule: "modesetting"
[ 79.723] (II) Unloading modesetting
[ 79.723] (II) UnloadModule: "fbdev"
[ 79.723] (II) Unloading fbdev
[ 79.723] (II) UnloadSubModule: "fbdevhw"
[ 79.723] (II) Unloading fbdevhw
[ 79.723] (II) UnloadModule: "vesa"
[ 79.723] (II) Unloading vesa
[ 79.728] (II) NOUVEAU(0): Channel setup complete.
[ 79.762] (II) NOUVEAU(0): Hardware support for Present enabled
[ 79.766] (II) NOUVEAU(0): [DRI2] Setup complete
[ 79.766] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 79.766] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 79.766] (II) Loading sub module "exa"
[ 79.766] (II) LoadModule: "exa"
[ 79.766] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 79.785] (II) Module exa: vendor="X.Org Foundation"
[ 79.785] compiled for 1.20.4, module version = 2.6.0
[ 79.785] ABI class: X.Org Video Driver, version 24.0
[ 79.796] (II) EXA(0): Driver allocated offscreen pixmaps
[ 79.796] (II) EXA(0): Driver registered support for the following operations:
[ 79.796] (II) Solid
[ 79.796] (II) Copy
[ 79.796] (II) Composite (RENDER acceleration)
[ 79.796] (II) UploadToScreen
[ 79.796] (II) DownloadFromScreen
[ 79.796] (==) NOUVEAU(0): Backing store enabled
[ 79.796] (==) NOUVEAU(0): Silken mouse enabled
[ 79.796] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 79.796] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 79.796] (==) NOUVEAU(0): DPMS enabled
[ 79.798] (II) Initializing extension Generic Event Extension
[ 79.799] (II) Initializing extension SHAPE
[ 79.799] (II) Initializing extension MIT-SHM
[ 79.800] (II) Initializing extension XInputExtension
[ 79.808] (II) Initializing extension XTEST
[ 79.808] (II) Initializing extension BIG-REQUESTS
[ 79.808] (II) Initializing extension SYNC
[ 79.809] (II) Initializing extension XKEYBOARD
[ 79.809] (II) Initializing extension XC-MISC
[ 79.809] (II) Initializing extension XFIXES
[ 79.810] (II) Initializing extension RENDER
[ 79.810] (II) Initializing extension RANDR
[ 79.811] (II) Initializing extension COMPOSITE
[ 79.811] (II) Initializing extension DAMAGE
[ 79.811] (II) Initializing extension MIT-SCREEN-SAVER
[ 79.811] (II) Initializing extension DOUBLE-BUFFER
[ 79.812] (II) Initializing extension RECORD
[ 79.812] (II) Initializing extension DPMS
[ 79.812] (II) Initializing extension Present
[ 79.813] (II) Initializing extension DRI3
[ 79.813] (II) Initializing extension X-Resource
[ 79.813] (II) Initializing extension XVideo
[ 79.813] (II) Initializing extension XVideo-MotionCompensation
[ 79.814] (II) Initializing extension SELinux
[ 79.814] (II) SELinux: Disabled by boolean
[ 79.814] (II) Initializing extension GLX
[ 85.881] (II) AIGLX: Loaded and initialized nouveau
[ 85.881] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 85.881] (II) Initializing extension XFree86-VidModeExtension
[ 85.882] (II) Initializing extension XFree86-DGA
[ 85.882] (II) Initializing extension XFree86-DRI
[ 85.882] (II) Initializing extension DRI2
[ 85.886] (II) NOUVEAU(0): NVEnterVT is called.
[ 85.910] (II) NOUVEAU(0): Setting screen physical size to 444 x 277
[ 85.911] resize called 1680 1050
[ 86.500] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 86.500] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 86.500] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 86.500] (**) Power Button: Applying InputClass "system-keyboard"
[ 86.500] (II) LoadModule: "libinput"
[ 86.500] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 86.568] (II) Module libinput: vendor="X.Org Foundation"
[ 86.568] compiled for 1.20.3, module version = 0.28.2
[ 86.568] Module class: X.Org XInput Driver
[ 86.568] ABI class: X.Org XInput driver, version 24.1
[ 86.568] (II) Using input driver 'libinput' for 'Power Button'
[ 86.568] (**) Power Button: always reports core events
[ 86.568] (**) Option "Device" "/dev/input/event1"
[ 86.568] (**) Option "_source" "server/udev"
[ 86.708] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 86.708] (II) event1 - Power Button: device is a keyboard
[ 86.708] (II) event1 - Power Button: device removed
[ 86.716] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 86.716] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 86.716] (**) Option "xkb_layout" "gb"
[ 86.716] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 86.784] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 86.784] (II) event1 - Power Button: device is a keyboard
[ 86.785] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 86.785] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 86.785] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 86.785] (**) Power Button: Applying InputClass "system-keyboard"
[ 86.785] (II) Using input driver 'libinput' for 'Power Button'
[ 86.785] (**) Power Button: always reports core events
[ 86.785] (**) Option "Device" "/dev/input/event0"
[ 86.785] (**) Option "_source" "server/udev"
[ 86.786] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 86.786] (II) event0 - Power Button: device is a keyboard
[ 86.786] (II) event0 - Power Button: device removed
[ 86.790] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 86.790] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 86.790] (**) Option "xkb_layout" "gb"
[ 86.790] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 86.792] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 86.792] (II) event0 - Power Button: device is a keyboard
[ 86.794] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event3)
[ 86.794] (**) USB OPTICAL MOUSE : Applying InputClass "evdev pointer catchall"
[ 86.794] (**) USB OPTICAL MOUSE : Applying InputClass "libinput pointer catchall"
[ 86.794] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE '
[ 86.794] (**) USB OPTICAL MOUSE : always reports core events
[ 86.794] (**) Option "Device" "/dev/input/event3"
[ 86.794] (**) Option "_source" "server/udev"
[ 86.796] (II) event3 - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[ 86.796] (II) event3 - USB OPTICAL MOUSE : device is a pointer
[ 86.796] (II) event3 - USB OPTICAL MOUSE : device removed
[ 86.814] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/0003:275D:0BA6.0001/input/input3/event3"
[ 86.814] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 8)
[ 86.814] (**) Option "AccelerationScheme" "none"
[ 86.814] (**) USB OPTICAL MOUSE : (accel) selected scheme none/0
[ 86.814] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[ 86.814] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[ 86.819] (II) event3 - USB OPTICAL MOUSE : is tagged by udev as: Mouse
[ 86.819] (II) event3 - USB OPTICAL MOUSE : device is a pointer
[ 86.821] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 86.821] (II) No input driver specified, ignoring this device.
[ 86.821] (II) This device may have been added with another device file.
[ 86.823] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event4)
[ 86.823] (II) No input driver specified, ignoring this device.
[ 86.823] (II) This device may have been added with another device file.
[ 86.827] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event5)
[ 86.827] (II) No input driver specified, ignoring this device.
[ 86.827] (II) This device may have been added with another device file.
[ 86.828] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[ 86.828] (II) No input driver specified, ignoring this device.
[ 86.828] (II) This device may have been added with another device file.
[ 86.828] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event7)
[ 86.828] (II) No input driver specified, ignoring this device.
[ 86.828] (II) This device may have been added with another device file.
[ 86.829] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event8)
[ 86.829] (II) No input driver specified, ignoring this device.
[ 86.829] (II) This device may have been added with another device file.
[ 86.829] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 86.829] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 86.829] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 86.829] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 86.829] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 86.829] (**) AT Translated Set 2 keyboard: always reports core events
[ 86.829] (**) Option "Device" "/dev/input/event2"
[ 86.829] (**) Option "_source" "server/udev"
[ 86.830] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 86.831] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard
[ 86.831] (II) event2 - AT Translated Set 2 keyboard: device removed
[ 86.844] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 86.844] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 86.844] (**) Option "xkb_layout" "gb"
[ 86.844] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 86.846] (II) event2 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 86.846] (II) event2 - AT Translated Set 2 keyboard: device is a keyboard
[ 113.355] (II) NOUVEAU(0): EDID vendor "HWP", prod id 9894
[ 113.355] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 113.355] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 113.355] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 113.355] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 113.355] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 113.355] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 113.900] (II) NOUVEAU(0): EDID vendor "HWP", prod id 9894
[ 113.900] (II) NOUVEAU(0): Using hsync ranges from config file
[ 113.900] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 113.900] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 113.900] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 113.900] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 113.900] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 113.944] (II) NOUVEAU(0): EDID vendor "HWP", prod id 9894
[ 113.944] (II) NOUVEAU(0): Using hsync ranges from config file
[ 113.944] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 113.944] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 113.944] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 113.944] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1152x720"x60.0 67.32 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 113.944] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 71417.332] -12
[ 71417.332] -12
[ 71425.855] -12
[ 71425.855] -12
[ 71425.861] -12I should probably grab Xorg.0.log next time it goes badly wrong.
BTW I have been seeing this on both the github master which I build locally and an ImageApp they supply, with all depenedent libs included.
Thanks for taking a look.
Re: font corruption makes LXDE become unusable.
One problem at a time please. If you didn't get a reply earlier, there's probably a good reason for it.
And no, I don't think it's related (although I didn't fully understand).
You didn't post the full output for 'journalctl -b'.
But forget about it for now.
Try this:
And no, I don't think it's related (although I didn't fully understand).
You didn't post the full output for 'journalctl -b'.
But forget about it for now.
Try this:
- Open freecad from a terminal
- reproduce the problem
- post whatever output you find inside the terminal - ALL of it
- then also open another terminal and issue 'journalctl -b > some.file'
- open some.file in a text editor, copy all of it, paste it here
Re: font corruption makes LXDE become unusable.
I mentioned that because an unknown service is not being started with the session. I have no way of knowing what it is and apparently neither does anyone else. It seemed appropriate to mention it in case it is relevant here so no one comes back later and says "FFS, why didn't you tell that before? " .drooly wrote:One problem at a time please. If you didn't get a reply earlier, there's probably a good reason for it.
And no, I don't think it's related (although I didn't fully understand).
I selected what looked like journalctl since last boot since it was pretty huge anyway. Sorry if that is not enough.You didn't post the full output for 'journalctl -b'.
But forget about it for now.
Try this:
- Open freecad from a terminal
- reproduce the problem
- post whatever output you find inside the terminal - ALL of it
- then also open another terminal and issue 'j-b > some.file'
- open some.file in a text editor, copy all of it, paste it here
It happened again earlier and I looked at Xorg.0.log and saw nothing which looked relevant to problem. I'll dig journalctl next time it happens. It is a progressive problem. The display gets progressively worse until it is unusable and I need to log out. So I don't expect to see any event logged anywhere.
I always run form console and get a lot of this sort of output spamming the console. No idea if that is supposed to be a problem or some residual debug info they forgot to turn off.
Code: Select all
nouveau: 0x02100210
nouveau: 0x00000000
nouveau: 0x0004eb00
nouveau: 0x00002dc4
nouveau: 0x0008f740
nouveau: 0x00001432
nouveau: 0x00001422
nouveau: 0x0004f680
nouveau: 0x82591f60
nouveau: 0x0004f684
nouveau: 0x82591f58
nouveau: 0x0008fd6c
nouveau: 0x00000000
nouveau: 0x00000ea7
nouveau: 0x00020000
Re: font corruption makes LXDE become unusable.
Not sure what you didn't understand about my instructions from last post.
With the amount of information you posted now, all I can say is: Yeah, it seems to be nouveau related.
Try the (appropriate!) proprietary nvidia driver, maybe it helps.
With the amount of information you posted now, all I can say is: Yeah, it seems to be nouveau related.
Try the (appropriate!) proprietary nvidia driver, maybe it helps.
Re: font corruption makes LXDE become unusable.
thanks.My on board graphics card is NVIDIA [GeForce 6150 LE], there are no proprietory drivers for this apparently,
Re: font corruption makes LXDE become unusable.
Wrong.luxy wrote:My on board graphics card is NVIDIA [GeForce 6150 LE], there are no proprietory drivers for this apparently,
Also have a good read of this.
Keyword "legacy driver". "Unsupported" does not mean it doesn't exist.
Take this as a hint to get active, not to start a discussion about old nvidia cards.
Re: font corruption makes LXDE become unusable.
Thanks for those links, it appears that legacy 390.xx should work. However, about a year ago I tried the NVidia .run file and it just crapped out half way through with no coherent reason and left with a right mess to clean up by hand. In the ensuing discussion here, someone told me that my GPU was not supported anyway.
Having been particularly unimpressed with the mess the provided file left my system in , I just took there word for it and dropped the whole proprietory thing.
I may give it another look next time I can set a day aside to clean up the mess if it goes wrong again.
Having been particularly unimpressed with the mess the provided file left my system in , I just took there word for it and dropped the whole proprietory thing.
I may give it another look next time I can set a day aside to clean up the mess if it goes wrong again.
Re: font corruption makes LXDE become unusable.
How did you come to that conclusion?luxy wrote:Thanks for those links, it appears that legacy 390.xx should work.
I came to a very different conclusion:
so for GeForce 6150LE I come up with NV4C.archwiki wrote:Determine the necessary driver version for your card by finding the code name (e.g. NV50, NVC0, etc.) on Nouveau wiki's code names page