thermal plugin of lxpanel 0.8.0-1 doesn't work on my ArchLinux 32bit. it always shows 40°:
i have tried to set sensors to settings but it still shows 40°
sensors works:
Code: Select all
$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +38.0°C (high = +74.0°C, crit = +100.0°C)
Core 1: +37.0°C (high = +74.0°C, crit = +100.0°C)
Code: Select all
$ acpi -t
Thermal 0: ok, 40.0 degrees C
Code: Select all
$ tree /sys/class/thermal
/sys/class/thermal
├── cooling_device0 -> ../../devices/virtual/thermal/cooling_device0
├── cooling_device1 -> ../../devices/virtual/thermal/cooling_device1
├── cooling_device2 -> ../../devices/virtual/thermal/cooling_device2
└── thermal_zone0 -> ../../devices/virtual/thermal/thermal_zone0
4 directories, 0 files
Code: Select all
$ tree /sys/devices/virtual/thermal/
/sys/devices/virtual/thermal/
├── cooling_device0
│ ├── cur_state
│ ├── device -> ../../../LNXSYSTM:00/LNXCPU:00
│ ├── max_state
│ ├── power
│ │ ├── async
│ │ ├── autosuspend_delay_ms
│ │ ├── control
│ │ ├── runtime_active_kids
│ │ ├── runtime_active_time
│ │ ├── runtime_enabled
│ │ ├── runtime_status
│ │ ├── runtime_suspended_time
│ │ └── runtime_usage
│ ├── subsystem -> ../../../../class/thermal
│ ├── type
│ └── uevent
├── cooling_device1
│ ├── cur_state
│ ├── device -> ../../../LNXSYSTM:00/LNXCPU:01
│ ├── max_state
│ ├── power
│ │ ├── async
│ │ ├── autosuspend_delay_ms
│ │ ├── control
│ │ ├── runtime_active_kids
│ │ ├── runtime_active_time
│ │ ├── runtime_enabled
│ │ ├── runtime_status
│ │ ├── runtime_suspended_time
│ │ └── runtime_usage
│ ├── subsystem -> ../../../../class/thermal
│ ├── type
│ └── uevent
├── cooling_device2
│ ├── cur_state
│ ├── device -> ../../../platform/PNP0C0B:00
│ ├── max_state
│ ├── power
│ │ ├── async
│ │ ├── autosuspend_delay_ms
│ │ ├── control
│ │ ├── runtime_active_kids
│ │ ├── runtime_active_time
│ │ ├── runtime_enabled
│ │ ├── runtime_status
│ │ ├── runtime_suspended_time
│ │ └── runtime_usage
│ ├── subsystem -> ../../../../class/thermal
│ ├── type
│ └── uevent
└── thermal_zone0
├── cdev0 -> ../cooling_device0
├── cdev0_trip_point
├── cdev1 -> ../cooling_device2
├── cdev1_trip_point
├── device -> ../../../LNXSYSTM:00/LNXSYBUS:01/LNXTHERM:00
├── mode
├── policy
├── power
│ ├── async
│ ├── autosuspend_delay_ms
│ ├── control
│ ├── runtime_active_kids
│ ├── runtime_active_time
│ ├── runtime_enabled
│ ├── runtime_status
│ ├── runtime_suspended_time
│ └── runtime_usage
├── subsystem -> ../../../../class/thermal
├── temp
├── trip_point_0_temp
├── trip_point_0_type
├── trip_point_1_temp
├── trip_point_1_type
├── trip_point_2_temp
├── trip_point_2_type
├── type
└── uevent
18 directories, 61 files
Code: Select all
$ lsmod|grep acpi
acpi_cpufreq 20480 0
processor 28672 1 acpi_cpufreq
pata_acpi 16384 0
libata 163840 4 pata_acpi,sata_via,pata_via,ata_generic
$ lsmod|grep thermal
thermal 20480 0