Hi
New to this forum.
I just installed Ubuntu 12.10 armhf on a BeagleBone which is factory installed on a Ampire 640480G2 touchscreen
Installation works like a charm , so for the lightness of graphic interface I choosen LXDE
The graphic interface is OK It works correctly with a keyboard/mouse connected to USB port
The touchscreen works but X and Y axes are inverted ( moving finger to left , poiter goes right ; moving finger up , pointer goes down )
I've found no utility to calibrate touchscreen , and it seems unrecognised by system (despite it works some way...)
I've installed tslib library and utility from command line by SSH but running ts_calibrate it says mine is not a touchscreen and the calibration pattern on display doesn't work.
I've ran xinput_calibrator but it says me "unable to connect to X server"
Are there some other ways to make my touchscreen to work the right way , or at least to made it recognized to system .
Any help really appreciated
Thank you
Federico
Touchscreen how can I calibrate ??
-
- Posts: 1093
- Joined: Sat Aug 27, 2011 5:44 pm
- Location: Sierra Vista, Arizona USA
- Contact:
Re: Touchscreen how can I calibrate ??
Wow. Never heard of this before so I did a little research and apparently it must happened often enough that someone has written about it. In any event there is a special WIKI page for debugging Touchpads.
https://wiki.ubuntu.com/DebuggingTouchpadDetection
https://wiki.ubuntu.com/DebuggingTouchpadDetection
Rex
-
- Posts: 2
- Joined: Fri Mar 29, 2013 3:25 pm
Re: Touchscreen how can I calibrate ??
Thanks Rex for answer and link
It was an experience lack of mine ........
I ran xinput_calibrator from a standard tty console instead from the X environment terminal......
Running xinput_calibrator from inside the graphic LXDE works like a charm and touchpad was calibrated ok
Hope this helps some other newbie like me......
Regards
It was an experience lack of mine ........
I ran xinput_calibrator from a standard tty console instead from the X environment terminal......
Running xinput_calibrator from inside the graphic LXDE works like a charm and touchpad was calibrated ok
Hope this helps some other newbie like me......
Regards
-
- Posts: 1093
- Joined: Sat Aug 27, 2011 5:44 pm
- Location: Sierra Vista, Arizona USA
- Contact:
Re: Touchscreen how can I calibrate ??
Thanks for posting back. We are all newbies in our own way. Stick around and perhaps you can help some one else with the LXDE. We are a small but growing forum and can use all the assistance that we can get.
Rex